• Basa Polymer Company, Unit 18, No. 21, Ayatollah Kashani Blvd, Tehran
  • +982144960014
Facebook Instagram Eaparat Linkedin

Glossy Epoxy Floor Coating

Glossy Epoxy Floor Coating

Product Introduction

Uses:

  • Exhibitions and showrooms
  • Administrative centers
  • Commercial centers
  • Educational facilities
  • Residential Houses

Features / Advantages:

  • Ease of installation, high abrasion resistance, durability, and long-term stability
  • Applicable on all types of existing flooring
  • No smell
  • Ease of mixing and ability to clean equipment with water
  • A smooth, medium gloss finish that is easy to clean.
  • Excellent resistance to oils, solvents, and detergents
  • Good mechanical and chemical resistance
  • Economical
  • Anti-slip final surface if required

Glossy Epoxy Floor Coating

Storage Conditions

If the container’s door is not opened and the original packaging is not damaged, the product can be stored for 6 months from the date of production in a dry environment and at a temperature between 15 and 30 degrees Celsius.

Preparation Substrate

A concrete substrate must first be mechanically prepared using grinding equipment until the surface of the concrete, which contains the remaining cement and water and causes the surface to become alkaline (concrete sap), is destroyed and becomes defective. The open vagina reached the concrete.

Weak points of concrete should be removed and surface defects such as pits, holes, and cracks should be removed. Fix the following. Fill holes, holes, and cracks. For this purpose, you can use materials for repair.

It should be noted that all the dust on the surface must be removed before applying the products, for which it is recommended to use industrial vacuum cleaners with high suction power.

The substrate must first be coated with one of the BASA primers.

Technical Information

Appearance specifications:

Component 1:

liquid, colored

Component 2:

Colorless liquid

Available colors:

Depending on the customer’s order, it is possible to choose the color.

Uses:

Can be used inside and outside the building

Need for primer:

It needs a primer.

Subtitles suitable for the product:

Concrete, epoxy, mosaic, stone, and ceramic surfaces

packaging:

Part 1:

1.5, 3 kg containers

Part 2:

10 and 20 kg containers

Part 1+2:

5.11 and 23 kg units ready to mix

Installation

Before mixing the two components, first, stir component 1. After adding all of Component 2 to Component 1, stir the resulting mixture for about two minutes at a speed of 400 rpm until it is homogeneous. Then add other components such as silica powder to the mixture, if necessary, based on the type of system required, and stir until they reach a continuous state. To make sure how to stir, pour the resulting mixture into another container and stir. Avoid movements that cause air to enter the mixture while stirring. For mixing, you can use a mechanical mixer with a speed of 300 to 400 rpm.

Description

BASADUR® E 717

Epoxy Floor Coating | Solvent-free| Glossy

BASADUR® E717 epoxy floor coating is a product based on modified epoxy resin and polyamine hardener, which is the final layer in resin floor systems with decorative uses. The final surface of this coating is glossy, and the best way to apply it is to use a wool roller.

BASADUR® E717 floor covering is used as a thin layer and mostly for decorative and light traffic industrial flooring purposes. The glossy finish of this epoxy floor coating brings more brightness to the space, which makes the room space bigger and brighter.

Also, due to the high pigment dosage used in the formulation of this floor coating, the hiding power of the color is remarkable, and it is possible to apply it at low thickness.

This floor covering is specially designed for use on the floor of the building and has good wear resistance against the traffic of people and light-wheeled vehicles. It is common to use this epoxy floor coating in light to medium uses as a waterproof floor material (after applying epoxy primer) and in decorative uses such as exhibitions, office, commercial, educational, and residential houses as the final layer of epoxy flooring.

Also, if you want to create a design or line on the surface of the epoxy floor or concrete, you can use BASADUR® E717 epoxy floor coating. In these cases, it is recommended to use BASADUR® E 402 self-leveling epoxy varnish or BADADUR® E 401 floor-coating epoxy varnish as a protective layer.

Download TDS

Reviews

There are no reviews yet.

Be the first to review “Glossy Epoxy Floor Coating”

Your email address will not be published. Required fields are marked *

eighteen − 9 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com

Subscribe to newsletter

Baspar Sazan Iranian company, provides products and services in a specialized way in the field of producing various types of polymer integrated flooring.

Facebook Instagram Eaparat Linkedin

Quick access

Contact us

Head quarter Office

Basa Polymer Company, Unit 18, No. 21, Ayatollah Kashani Blvd, Tehran, Iran

Factory

Basa Polymer Factory, after Madar Square, West Shahid Rajaei Blvd, Caspian Industrial Town, Qazvin.

Call

+982144960014
+982144964839
+982144966079

Website design and development by the digital marketing team hamiddehban.com

Copyright 1402 © All rights of this website are reserved for Basa Polymer company.