• Basa Polymer Company, Unit 18, No. 21, Ayatollah Kashani Blvd, Tehran
  • +982144960014
Facebook Instagram Eaparat Linkedin

Epoxy topcoat| Semi Matt

Epoxy topcoat| Semi Matt

Product Introduction

Applications

As a seal coating, resin floor protective varnish (top coat)

Characteristics / Advantages

  • Creates a surface with high scratch resistance, semi-gloss, and easy-to-clean
  • High chemical and abrasion resistance, suitable for environments with high abrasion resistance
  • Suitable to use in workshops and garages with light and medium traffic, and decorative sections
  • Easy application during the installation
  • Economical and cost-effective
  • Resistant to liquid penetration
  • The final surface is semi-matte
  • Slip-resistant surfaces are possible

Epoxy topcoat| Semi Matt

Storage Conditions

The product must be stored in original, unopened, and undamaged sealed packaging in dry conditions at temperatures between +15 °C and +30 °C. In these conditions, the product can be stored for 6 months from the date of production.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

The substrate must first be impregnated with one of the BASA POLYMER primers.

Technical Information

Appearance

Part A: colorless, liquid

Part B: transparent, liquid

Required Primer for BASADUR® E401:

This product requires a primer.

 

Suitable substrates for BASADUR® E 401:

Concrete, mosaic, stone, and ceramic

Packaging

Small Package

Part A: 14.6 Kg container

Part B: 5.4 Kg container

Installation

Before mixing the two parts, stir Part A. After adding Part B to Part A, stir the mixture for 2 minutes at 400 rpm using a drill mixer. While stirring avoid sudden movements that allow air to enter the mixture.

After preparation, pour the material on the surface and spread it evenly using a wool roller. Repolish the surface by using a wool roller to remove the roller traces.

To maintain the appearance quality, use high-quality rollers.

Description

BASADUR® E 401

Floor Coating | Solvent-based |Semi Matt| Clear Coat

 

BASADUR® E 401 is an epoxy clear floor coating based on modified epoxy resin and polyamine hardener. Epoxy varnish BASADUR® E 401 is applied as a concrete sealant by using rollers after surface preparation and applying the primer.

This product is also used as an anti-wear/anti-abrasion protective topcoat in a decorative resin-based flooring system or epoxy flooring with medium and light traffic.

Protection from scratch and abrasion, easier washing and maintenance, orange peel textured finish, and being semi-matt are some of the benefits of using this product. Note that if the epoxy flooring has a design with colored flakes (mosaic design), it is necessary to use transparent epoxy varnish as a protector. Transparent epoxy varnish BASADUR® E 401 is two-component and solvent-based and is applied using rollers in thicknesses of less than 100 μm as the final layer of an epoxy flooring system, especially in office and commercial applications.

By applying this transparent epoxy clear coat, the scratch resistance of epoxy flooring will be enhanced and it will be easier to clean.

TDS

Reviews

There are no reviews yet.

Be the first to review “Epoxy topcoat| Semi Matt”

Your email address will not be published. Required fields are marked *

5 × three =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com

Subscribe to newsletter

Baspar Sazan Iranian company, provides products and services in a specialized way in the field of producing various types of polymer integrated flooring.

Facebook Instagram Eaparat Linkedin

Quick access

Contact us

Head quarter Office

Basa Polymer Company, Unit 18, No. 21, Ayatollah Kashani Blvd, Tehran, Iran

Factory

Basa Polymer Factory, after Madar Square, West Shahid Rajaei Blvd, Caspian Industrial Town, Qazvin.

Call

+982144960014
+982144964839
+982144966079

Website design and development by the digital marketing team hamiddehban.com

Copyright 1402 © All rights of this website are reserved for Basa Polymer company.