Self-leveling Epoxy Clear Coat

Self-leveling Epoxy Clear Coat

Product Introduction

BASADUR® E 402 epoxy varnish is used as the final layer and protective layer of epoxy flooring in hygienic and decorative applications. The final surface of this product is glossy and smooth.

Characteristics / Advantages

  • Transparent and colorless
  • Self-leveling
  • The smooth and glossy final surface
  • Completely hygienic, sealed and non-absorbent
  • Ability to easily clean and disinfect the surface

Storage Conditions

The product must be stored in original, unopened, and undamaged sealed packaging in dry conditions at temperatures between +15 °C and +30 °C. In these conditions, the product can be stored for 6 months from the date of production.

Preparation Substrate

Transparent and self-leveling epoxy varnish BASADUR® E 402 is used as the final layer of resin flooring. As a result, all the steps of the resin floor surface preparation for the previous layers must be completed. Before applying BASADUR® E 402 varnish, it is recommended that the substrate be prepared by sanding with soft sandpaper to spread the material better on the floor surface.

Technical Information

Appearance

Part A: colorless, liquid

Part B: transparent, liquid

Required Primer for BASADUR® E402:

This product requires a primer.

 

Suitable substrates for BASADUR® E 402:

Epoxy flooring prepared concrete, mosaic, stone, and ceramic surfaces

Packaging

Small Package

Part A: 13.2 Kg container

Part B: 6.8 Kg container

Installation

Before mixing the two parts, stir Part A. After adding Part B to Part A, stir the mixture for 2 minutes at 400 rpm using a drill mixer. While stirring avoid sudden movements that allow air to enter the mixture.

After preparation, pour the material on the surface and spread it evenly using a combed squeegee and spiked roller. Re-polish the surface using a spiked roller to remove roller traces.

Description

BASADUR® E402

Self-Levelling | Solvent-free | Clear Coat

BASADUR® E 402 epoxy clear coat is a self-leveling, 100%-solid, epoxy coating based on modified epoxy resin and polyamine hardener. This epoxy clear coat is two-component and after complete mixing of the two components, it is applied in thicknesses ranging from 500 μm to 1000 μm, on epoxy flooring or concrete flooring as the top coat.

Transparent self-leveling epoxy coating BASADUR® E 402 creates a completely smooth and glossy surface. In order to achieve the best adhesive strength, it is recommended to sand the previous layer of epoxy flooring using soft sandpaper. The final surface of the BASADUR® E 402 self-leveling varnish is perfectly smooth and glossy.

When installing self-leveling epoxy clear coating, the use of a combed squeegee and spiked roller is recommended. Using this protective varnish is preferable where the substrate is perfectly level. Otherwise, due to the self-leveling ability of the product, there is a possibility that the material will move towards the slope of the floor and the material will be piled up in these areas. If it is not possible to create a completely level surface in the substrate, BASADUR® E 402 clear varnish can be used using a wool roller and in orange peel texture.

One of the most widespread applications of BASADUR® E 402 epoxy varnish is the use of this epoxy varnish as a protective layer on epoxy flooring with decorated and color flake design, which is done in the lower layers of the design. Using BASADUR® E 402 epoxy protective varnish, the underlying design will be protected from any abrasion, corrosive materials, or contaminants.

TDS

Reviews

There are no reviews yet.

Be the first to review “Self-leveling Epoxy Clear Coat”

Your email address will not be published. Required fields are marked *

4 × three =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com