Polyamide Epoxy Primer

Polyamide Epoxy Primer

Product Introduction

Solvent base epoxy polyamide primer

Uses:

As a primer on concrete, wall, stone, mosaic and ceramic surfaces in industrial, office, parking and warehouse uses…

Features/Advantages:

  • Two-component product
  • Moisture resistant
  • Authority against adverse weather conditions
  • Low viscosity
  • High adhesion to mosaic concrete, stone, and ceramics
  • Easy to use during installation
  • Good mechanical strength
  • flexible
  • Has a long pot life

Storage Conditions

If the door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment at a temperature between 15 and 30 degrees Celsius.

Preparation Substrate

A concrete substrate must first be prepared mechanically and by means of submersible equipment until the top surface of the concrete, which contains the remaining cement and water and causes the surface to become alkaline (concrete sap), is removed and penetrates into the open pores of the concrete. Receipt.

Weak points of concrete must be removed and surface defects such as pits, holes, and cracks must be drained and then repaired. For this purpose, you can use the appropriate material for the repair.

It should be noted that all the dust on the surface must be removed before applying the products, for which it is recommended to use industrial vacuum cleaners with high suction power.

Technical Information

Appearance specifications:

Part 1: liquid, colored
Part 2: liquid, colored

Subtitles suitable for the product:

Concrete, mosaic, stone and ceramic surfaces

packing:

Part 1: 13.6 kg bucket

Part 2: 3.4 kg bucket

Installation

Before mixing the two components, first, mix the component 1. After adding the entire component 2 to component 1, stir the resulting mixture for about two minutes at a speed of 400 rpm until it is homogeneous. In order to make sure how to mix, pour the resulting mixture into another container and mix. Avoid movements that cause air to enter the mixture while stirring.

Description

Epoxy Primer| Solvent based| Polyamide

BASADUR® E 100 epoxy polyamide primer, due to its low viscosity and long pot life, can penetrate the substrate, especially concrete, create high adhesion, and seal the surface well. Also, this product is widely used due to its high adhesion to all types of substrates including stone, ceramic, concrete, and mosaic, high resistance to various weather conditions, corrosion resistance, flexibility, high penetrating power, and resistance to moisture. It has industries.

Using epoxy/polyamide floor primer is one of the best solutions to achieve reliable and optimal performance in resin floors.

Advantages of using polyamide primer before applying epoxy intermediate layer:

The polyamide liner penetrates the floor and, in addition to creating maximum adhesion, with its higher flexibility than polyamine primers, it reduces the possibility of crushing or breaking the coating due to vibrations.

If the weather conditions are unfavorable and make it difficult to apply the floor primer, in these situations, polyamide primer can be a better option than polyamine primer due to its good weather resistance.

If the goal of applying the sealer is to achieve good chemical resistance and high wear resistance, we suggest you buy primer BASADUR® E101. Because it is designed based on polyamine, it also has a higher penetrating power than polyamide primers.

Note that before applying the primer, the preparation of the underlying surface is done well and the surface is free of any dust, grease, and pollution. If after applying the BASADUR® E 100 primer due to the high porosity of the concrete, the primer penetrates into the concrete and the primer film does not form on the surface of the concrete, it is necessary to apply another layer of primer.

Reviews

There are no reviews yet.

Be the first to review “Polyamide Epoxy Primer”

Your email address will not be published. Required fields are marked *

19 + fourteen =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com