General Epoxy Primer

General Epoxy Primer

Product Introduction

Solvent-based Epoxy primer:

Use as a primer on concrete, stone, mosaic and ceramic surfaces in general industrial, office, parking and warehouse uses.

Features/advantages:

  • Low viscosity
  • The power of great penetration follows
  • Easy to use when using

Storage Conditions

If the door is not opened and the factory’s original packaging containers are not damaged, the product can be stored for 6 months from the date of production in a dry environment at a temperature between 15 and 30 degrees Celsius.

Preparation Substrate

A concrete floor must be prepared mechanically and by subfloor equipment first, so that the surface of the concrete surface, which has residue and water and causes alkalinity of the surface (concrete sap), is destroyed and disturbed. The open vagina reached the concrete.

The weak points of the concrete should be removed and surface defects such as pits, holes, and cracks and then cured. For this purpose, you can use the appropriate material for the repair.

It should be noted that all the dust on the surface must be removed before using the products, for which industrial vacuum cleaners with high suction power are recommended.

Technical Information

Appearance characteristics:

Resin – component 1: liquid, colorless Hardener

component 2: liquid, colorless

Subtitles suitable for the product: Concrete, mosaic, stone and ceramic surfaces

Packing

Small packaging Part 1: 13.5 kg bucket

Part 2: 3.5 kg bucket

Component 1+2: 20 kg units ready to mix

Great packaging

Part 1: 200 kg barrels

Part 2: 40 and 120 kg barrels

Installation

Before mixing the two components, first stir the component 1. After adding the entire component 2 to component 1, stir the resulting mixture for about two minutes at a speed of 400 rpm using a drill mixer until it is homogeneous. Avoid movements that cause air to enter the mixture while stirring. Then apply the material on the surface using a wool roller. The consumption of the prepared material per square meter is about 100-200 grams (depending on the condition of the floor). Avoid keeping the mixed material in the bucket for a long time, because due to heat generation due to the reaction of the components, the primer’s usage time will be very short.

Description

BASADUR®-E101

BASADUR®-E101 is a solvent-based epoxy primer with a polyamine hardener as the curing agent. This primer formulation contains solvent and therefore has a very low viscosity and great penetration power to the substrate, especially concrete. When using this product on porous concrete surfaces, the issue of solvent confinement should be considered.

Benefits

  • Good adhesion to concrete, mosaic, and Stone
  • Good penetration into well-prepared concrete
  • Very low viscosity
  • Easy application

BASADUR®-E101 primer provides maximum adhesion to the concrete surface. This primer can also be used on stone, mosaic, and ceramic surfaces. This epoxy primer penetrates the substrate to help the epoxy floor to adhere to the floor. In other words, the use of epoxy primer is essential to ensure maximum adhesion of epoxy flooring to concrete and other surfaces and its durability during use. By applying epoxy primer on the concrete, problems like peeling off and bubbling on the surface of the epoxy coating would be prevented. There are different types of epoxy primers. According to the floor conditions and the type of epoxy flooring required, a suitable epoxy primer should be used chosen. In general applications, the use of BASADUR®-E 101 primer is recommended due to its ease of application and excellent properties. Make sure that the substrate is well-prepared before applying the primer and that the surface is free of any dust, grease, and dirt. In the case of porous concrete, if after applying BASADUR®-E 101 primer, no film of primer was formed on the concrete surface, another layer of primer must be applied.

To view the product technical data sheet, click BASADUR®-E101 TDS Solvent-Borne Primer.

Product TDS

Reviews

There are no reviews yet.

Be the first to review “General Epoxy Primer”

Your email address will not be published. Required fields are marked *

5 × 3 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com