• Basa Polymer Company, Unit 18, No. 21, Ayatollah Kashani Blvd, Tehran
  • +982144960014
Facebook Instagram Eaparat Linkedin

Semi-Matt Floor Coating| Epoxy

Semi-Matt Floor Coating| Epoxy

Product Introduction

Applications

  • Exhibitions
  • Office Centres
  • Commercial buildings
  • Educational buildings
  • Residential Houses

Characteristics / Advantages

  • Easy installation, high abrasion resistance, durability, and long-term stability
  • Applicable on existing floors
  • It does not emit odors and is applicable in restricted environments
  • Easy mixing and ability to clean equipment with water
  • Uniform/level finish with a medium gloss that is easy to clean.
  • Excellent resistance to oils, solvents, and detergents
  • Well mechanical and chemical resistance
  • Easy application
  • Economical
  • Resistant to liquid penetration
  • The glossy or semi-gloss final surface
  • Slip-resistant surfaces are possible

E707

Storage Conditions

The product must be stored in original, unopened, and undamaged sealed packaging in dry conditions at temperatures between +15 °C and +30 °C. In these conditions, the product can be stored for 6 months from the date of production.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

The substrate must first be impregnated with one of the BASAPOLYMER Primers.

Technical Information

Appearance

Part A: transparent, liquid

Part B: transparent, liquid

Suitable substrates for BASADUR® E 707:

Concrete, mosaic, stone, and ceramic surfaces

Packaging

Small Package 

Part A: 1.5 Kg container

Part B: 10 Kg container

Part A+B: 11.5 Kg ready to mix unit

Large Package

Part A: 3 Kg container

Part B: 20 Kg container

Part A+B: 23 Kg ready to mix unit

Available colors:

Depending on the customer’s order, color selection is possible.

Uses:

Can be used inside and outside the building

Required Primer for BASADUR® E707:

This product requires a BASAPOLYMER Primer.

Installation

Before mixing the two parts, stir Part A. After adding Part B to Part A, stir the mixture for 2 minutes at 400 rpm using a drill mixer. Then, if necessary, depending on the type of system required, add other components such as silica powder to the mixture and stir until continuous. To ensure how to stir, pour the resulting mixture into another container and stir. While stirring avoid sudden movements that allow air to enter the mixture. A mechanical stirrer with a speed of 300 to 400 rpm can be used for mixing.

Description

BASADUR® E 707

Floor Coating | Solvent-based| Semi-Matt

BASADUR® E 707 is a colored epoxy coating for floor or top layer (top-coat) used in resin floor systems with decorative applications. BASADUR® E707 epoxy floor coating is a product based on modified epoxy resin and has an environmental curing system that is applied in thicknesses of 100 μm to 200 μm using wool rollers on concrete surfaces or epoxy flooring subs. The surface coated with BASADUR® E 707 has the final finish of semi-matte and orange peel skin.

It is common to use this floor covering in light traffic applications as a sealing floor covering (after applying epoxy primer) and in decorative applications such as exhibitions, offices, commercial, educational, and residential houses as the final layer of epoxy flooring. Also, if you want to create a design or line on the surface of epoxy or concrete flooring, you can use BASADUR® E707 epoxy floor coating. In these cases, the use of self-leveling epoxy varnish BASADUR® E 402 or epoxy varnish/floor coating BASADUR® E 401 is recommended as a protective layer.

BASADUR® E 707 is specially designed for use on the floor of buildings and has good abrasion resistance against the movement of people and light-wheeled vehicles. It is a good alternative to epoxy protective paints, which are often used for floor markings and wear away quickly.

It should be noted that BASADUR® E707 epoxy floor covering can also have antibacterial properties if the customer needs it.

TDS Download

Reviews

There are no reviews yet.

Be the first to review “Semi-Matt Floor Coating| Epoxy”

Your email address will not be published. Required fields are marked *

2 × three =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com

Subscribe to newsletter

Baspar Sazan Iranian company, provides products and services in a specialized way in the field of producing various types of polymer integrated flooring.

Facebook Instagram Eaparat Linkedin

Quick access

Contact us

Head quarter Office

Basa Polymer Company, Unit 18, No. 21, Ayatollah Kashani Blvd, Tehran, Iran

Factory

Basa Polymer Factory, after Madar Square, West Shahid Rajaei Blvd, Caspian Industrial Town, Qazvin.

Call

+982144960014
+982144964839
+982144966079

Website design and development by the digital marketing team hamiddehban.com

Copyright 1402 © All rights of this website are reserved for Basa Polymer company.