Hot Water-Resistant MMA Top Coat

Hot Water-Resistant MMA Top Coat

Product Introduction


As a final coating (transparent varnish or top coat) in places where wear, UV resistance, and impact resistance are important, such as sports halls, commercial, office, and residential houses – open spaces – inside and outside the building and decorative items


Features / Advantages:

  • High mechanical resistance
  • Resistant to sunlight/ultraviolet rays
  • Excellent abrasion resistance
  • Excellent impact resistance
  • High curing speed
  • Easy to use when installing
  • Flexible
  • Matt/Satin’s final surface
  • Seamless and uniform finished surface
  • High adhesive strength

Storage Conditions

If the door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment and the original packaging at a temperature between 15 and 25 degrees Celsius.

Preparation Substrate

A concrete substrate must first be prepared mechanically and using grinding equipment until the top surface of the concrete, which contains the remaining cement and water and causes the surface to become alkaline (concrete sap), is removed and penetrates the open pores of the concrete.

Weak points of concrete must be removed and surface defects such as pits, holes, and cracks must be drained and then repaired. For this purpose, you can use the appropriate material of BASA Polymer for the repair.

It should be noted that all the dust on the surface must be removed before applying the products, for which it is recommended to use industrial vacuum cleaners with high suction power.

Technical Information

Appearance specifications:

  • Component 1: Liquid
  • Component 2: White powder


  • Component 1: 10 kg
  • Component 2: Proportionate to temperature based on the curing temperature table


Stir component 1 first before mixing. Then add component 2 to component 1 and stir for about two minutes at a speed of 400 rpm. Avoid movements that cause air to enter the mixture while stirring. For mixing, you can use a mechanical mixer with a speed of 300 to 400 rpm.



MMA Floor Coating| Hot Water-Resistant Top Coat

BASADUR® M 503 is made of acrylate resin with medium viscosity, which is used as the final coating of the MMA flooring system in wet environments (such as food industry flooring). This coating can be applied as the final layer in both transparent and colored finishes after installing the middle layer on the surface. The most important use of BASADUR® M503 acrylic floor coating is to use it in environments with a lot of washing and those exposed to hot water, such as food industry production halls.

The flooring system used in the food, beverage, meat processing, dairy industries, etc. must-have features that, in addition to meeting the needs and standards, are practical and can withstand the challenges ahead. This MMA topcoat resistant to hot water is one of the most suitable floor coverings applicable in the mentioned industries because while increasing strength, and resistance to chemicals present in the environment, by creating a seamless layer with the ability to wash easily, there is a sanitary surface guaranteed. This cover can resist water at a temperature of 80 degrees Celsius.

BASADUR® M 503 is a very resistant and durable coating, a new generation of flooring that replaces ceramic, marble, tiles, and traditional flooring in many industries, including the food industry. High production technology, integrated and seamless structure, excellent resistance to wear, and the possibility of production in various colors are other prominent features of this product.

Another main advantage of acrylate floor covering is its fast curing, which can meet the needs of many industries that have limited opportunity to install flooring.


There are no reviews yet.

Be the first to review “Hot Water-Resistant MMA Top Coat”

Your email address will not be published. Required fields are marked *

20 − seven =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:



Whats app