Elastic MMA Body Coating

Elastic MMA Body Coating

Product Introduction


The base coat/ body coat of MMA flooring systems (both self-leveling and slip-resistant) where the elasticity and impact resistance of the flooring are important.

Features / Advantages:

  • High mechanical resistance
  • High abrasion resistance
  • Fast curing reaction
  • Low viscosity
  • Easy to use when installing
  • Anti-slip final surface if required

Storage Conditions

If the door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment and the original packaging at a temperature between 15 and 25 degrees Celsius.

Preparation Substrate

A concrete substrate must first be prepared mechanically and by means of submersible equipment until the top surface of the concrete, which contains the remaining cement and water and causes the surface to become alkaline (concrete sap), is removed and penetrates into the open pores of the concrete. Receipt.

Weak points of concrete must be removed and surface defects such as pits, holes, and cracks must be drained and then repaired. For this purpose, you can use the appropriate material for the repair.

It should be noted that all the dust on the surface must be removed before applying the products, for which it is recommended to use industrial vacuum cleaners with high suction power.

Technical Information

Appearance specifications:

  • Component 1: liquid, colored
  • Component 2: mineral powder
  • Part 3: White powder

Color selection is possible.

Need for primer:

Use a primer.

Suitable substrates for the product:

Concrete, mosaic, stone, and ceramic surfaces


  • Component 1: 8.2 kg
  • Component 2: 16.8 kg
  • Component 3: according to the temperature based on the cooking temperature table


Stir component 1 first before mixing. Then add component 2 to component 1 and stir for about two minutes at a speed of 400 rpm. Avoid movements that cause air to enter the mixture while stirring. For mixing, you can use a mechanical mixer with a speed of 300 to 400 rpm.



MMA Self levelling| 3-Component|Elastic

BASADUR® M 302 is an MMA flooring body coat based on elastic methacrylate resin for use as an intermediate layer of quartz design resin flooring (broadcasted) for concrete, metal, and asphalt surfaces. The advantages of using this product include fast installation, impact and vibrational resistance, and high abrasion resistance in heavy traffic.

The technology used in the production of the MMA elastic body coat has made it one of the best options in environments with heavy traffic. One of the important things about resin flooring used in these environments is its resistance to wear. The purpose of designing self-leveling acrylate coating M302 in BASA Polymer is to achieve excellent abrasion resistance and greater strength while maintaining elasticity.

Another feature of BASADUR® M302 methyl methacrylate coating that distinguishes it from other hard methyl methacrylate coatings is its ability to repel shock and possible stresses due to its elasticity. Therefore, it is recommended to use this product in places where the mechanical vibration of the equipment increases the possibility of damage to the flooring.

Also, due to its fast curing reaction and short pot life, this product can be installed in the shortest time.


There are no reviews yet.

Be the first to review “Elastic MMA Body Coating”

Your email address will not be published. Required fields are marked *

3 × five =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:



Whats app