3-Component MMA Coating

3-Component MMA Coating

Product Introduction


  • Self-leveling flooring,
  • Anti-slip flooring


Features/advantages of BASADUR® M301 self-leveling acrylate coating:

  • Excellent mechanical resistance
  • Fast curing
  • Medium viscosity
  • Easy to use when installing
  • Anti-slip final surface if needed
  • Integrated and uniform finished surface
  • Excellent abrasion resistance

Storage Conditions

If the container door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment and the original packaging at a temperature between 15 and 25 degrees Celsius.

Preparation Substrate

A concrete substrate must first be prepared mechanically and by means of grinding equipment until the top surface of the concrete, which contains the remaining cement and water and causes the surface to become alkaline (concrete sap), is removed and penetrates into the open pores of the concrete.

Weak points of concrete must be removed and surface defects such as pits, holes, and cracks must be drained and then repaired. For this purpose, you can use the appropriate material for the repair.

It should be noted that all the dust on the surface must be removed before applying the products, for which it is recommended to use industrial vacuum cleaners with high suction power.

Technical Information

Appearance specifications:

Component 1: liquid, colored
Part 2: Mineral powder and pigment
Component 3: White powder

It is possible to order in various colors.

Need for primer: use primer.

Subtitles suitable for the product:

Concrete surface, mosaic, stone, ceramic


Part 1: 8.2 Building
Part 2: 16.8 internal


Stir component 1 before mixing. Then add component 2 to component 1 and stir for about two minutes at a speed of 400 rpm. Avoid movements that cause air to enter the mixture while stirring. For mixing, you can use a mechanical mixer with a speed of 300 to 400 rpm.



MMA Self-levelling | 3-Component

BASADUR® M301 is a three-component, solvent-free, self-leveling methyl methacrylate product as the interlayer coat of the flooring system. This product with medium viscosity is used to install the middle layer of the flooring system. Excellent physical and mechanical properties are other features of this product that make it more suitable for very heavy to light traffic applications. Also, the quick curing and short pot life of BASADUR® M 301 make it possible to install it in the shortest time.

The physical and mechanical characteristics of BASADUR® M 301 make it a good choice among other resin floors. The important issue here is that in heavy traffic, the resin flooring shows high resistance against pressure, wear, and stress in industrial places. In this regard, it is of particular importance to follow the necessary standards, pay attention to the design of a quality product, and use high-quality raw materials that are included in the production of self-leveling acrylate coating.

Considering the medium viscosity and its self-leveling feature, it will be possible to install BASADUR® M301 with a smooth surface. Of course, there are various designs regarding the final appearance, and users sometimes act according to their taste in this area. Another benefit of this product is the possibility of creating a final non-slip surface when there is a possibility of slipping in industrial environments or warehouses.

One of the important things in many industries is the installation of resin flooring with the best performance in the shortest time. BASADUR® M 301 cures in the shortest time and reaches the expected properties due to its fast-curing speed and short pot life.


There are no reviews yet.

Be the first to review “3-Component MMA Coating”

Your email address will not be published. Required fields are marked *

4 − 1 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:



Whats app