Economical Epoxy primer

Economical Epoxy primer

Product Introduction


Especially for use on concrete surfaces with high porosity


  • Two-component product
  • Low viscosity
  • Very high adhesion to concrete with high porosity, mosaic, stone, and ceramics
  • Easy to use during installation
  • Very high mechanical strength and strengthening of weak foundations

Storage Conditions

If the door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment at a temperature between 15 and 30 degrees Celsius.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

It is possible to use BASADR®-E 112 primer on fresh concrete surfaces or places where the moisture of the substrate.

Technical Information

Appearance specifications:

Part 1: liquid, colored

Component 2: liquid, colorless

Subtitles suitable for the product:

Concrete, mosaic, stone, and ceramic surfaces


Part 1: 13.5 kg bucket

Part 2: 3.5 kg bucket


Because of the special formulation of this epoxy primer, its application time is very short. To prevent the primer from rapidly curing, the material can be prepared in small quantities.

BASADR®-E 112 epoxy primer is two-component and after mixing the two components with a drill mixer, this product is ready to be applied on all types of concrete, stone, mosaic, ceramic, and metal surfaces. Epoxy primer BASADR®-E 112 is applied by using wool rollers.



Epoxy primer Solvent free Polyamine Economical

BASADUR® E 112 is a primer based on standard epoxy resin and polyamine hardener. This product is solvent-free and with special additives, it creates maximum adhesion with the substrate and the next layer.

Unlike other primers, BASADUR®-E 112 is not transparent due to its special and unique formulation. This primer is designed in such a way that it can be ideal for medium to high-porosity concrete surfaces and substrates. Note that if there is a lot of porosity in the concrete and the substrate, the use of general solvent-free primers will increase the cost, but BASADUR®-E 112 primer with its economical price and the raw materials included in its construction makes up for this drawback. It fills nicely and makes the substrate suitable for installing higher layers.

Also, BASADUR® E 112 primer prevents the upper layers from being absorbed into the underlying surface, which will ultimately reduce the cost of the resin flooring system. This primer, like other types of epoxy flooring materials, is two-component and makes the bottom surface waterproof.

It should be noted that before use, mix component one well for homogenization.

Click to know the technical information about the product.



There are no reviews yet.

Be the first to review “Economical Epoxy primer”

Your email address will not be published. Required fields are marked *

five × 2 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:



Whats app