Solvent Free Epoxy primer for Damp Substrate

Solvent Free Epoxy primer for Damp Substrate

Product Introduction

Uses:

Especially for use on wet surfaces/the possibility of using on fresh concrete surfaces or places where, due to existing restrictions, the amount of moisture in the foundation is higher than the permissible limit.

Features/Advantages:

Two-component product

Very high adhesive strength

Storage Conditions

If the door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment at a temperature between 15 and 30 degrees Celsius.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

It is possible to use BASADR®-E 105 primer on fresh concrete surfaces or places where the moisture of the substrate.

Technical Information

Appearance specifications:

Component 1: liquid, colorless

Component 2: liquid, colorless

Subtitles suitable for the product:

Concrete, mosaic, stone, and ceramic surfaces

packing:

Part 1: 11.5 kg bucket

Part 2: 5.5 kg bucket

Installation

Because of the special formulation of this epoxy primer, its application time is very short. To prevent the primer from rapidly curing, the material can be prepared in small quantities.

BASADR®-E 105 epoxy primer is two-component and after mixing the two components with a drill mixer, this product is ready to be applied on all types of concrete, stone, mosaic, ceramic, and metal surfaces. Epoxy primer BASADR®-E 105 is applied by using wool rollers.

Description

BASADR®-E 105

Epoxy primer| Solvent Free| Polyamine| Damp Substrate

BASADUR®-E 105 is a two-component epoxy primer that is solvent-free and suitable for use on wet surfaces.

One of the most obvious features of this product is that it can be used on the surface of fresh concrete or in places where, due to existing restrictions, the humidity level of the foundation is higher than the permissible limit.

BASADR®-E 105 with low viscosity is used to increase the adhesion of the coating to all types of concrete, stone, cement, etc. substrates. The primer, as the interface between the substrate and the coating, prevents the resin flooring system from peeling off by creating chemical and mechanical connections. It should be noted that the presence of micro-pores and appropriate roughness with the flooring before applying the primer will help to create a more mechanical lock and better adhesion.

Also, the non-use of solvent in the formulation of this product will eliminate the problems caused by the confinement of the solvent in the high thickness and deep porosity of the concrete and will help to strengthen the adhesion to the substrate as much as possible.

The presence of moisture in the substructure, especially in concrete substructures, will cause problems with epoxy flooring. Because moisture can’t penetrate or pass through the flooring. Therefore, the implementation of epoxy flooring in these conditions and when the concrete is fresh will eventually lead to blisters and bubbles. BASADUR®-E 105 prevents any blistering in the final surface with maximum adhesion to wet substrates.

BASADUR®-E105 two-component epoxy primer is ready to apply on all types of concrete, stone, mosaic, ceramic, and metal surfaces after being mixed by a mechanical stirrer. Installation and implementation of BASADUR®-E105 epoxy primer are done using a wool roller.

download TDS

Reviews

There are no reviews yet.

Be the first to review “Solvent Free Epoxy primer for Damp Substrate”

Your email address will not be published. Required fields are marked *

five + 3 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com