Damp-Substrate Epoxy Primer

Damp-Substrate Epoxy Primer

Product Introduction

Applications

  • Special primer for damp surfaces
  • Possibility of use on fresh concrete

Characteristics / Advantages

  • Two-component product
  • Very high adhesion strength
  • Maximum resistance to surface blisters and floor delamination due to the presence of moisture

Very short pot life

Storage Conditions

The product must be stored in original, unopened, and undamaged sealed packaging in dry conditions at temperatures between +15 °C and +30 °C. In these conditions, the product can be stored for 6 months from the date of production.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

It is possible to use BASADR®-E 104 primer on fresh concrete surfaces or places where the moisture of the substrate.

Technical Information

Appearance

Part A: transparent, liquid

Part B: transparent, liquid

 

Suitable substrates for BASADUR®-E 104:

Concrete, mosaic, stone, and ceramic surfaces

 

Packaging:

Small Package

Part A: 10.3 Kg container

Part B: 6.7 Kg container

Part A+B: 17 Kg ready to mix unit

Installation

Because of the special formulation of this epoxy primer, its application time is very short. To prevent the primer from rapidly curing, the material can be prepared in small quantities.

BASADR®-E 104 epoxy primer is two-component and after mixing the two components with a drill mixer, this product is ready to be applied on all types of concrete, stone, mosaic, ceramic, and metal surfaces. Epoxy primer BASADR®-E 104 is applied by using wool rollers.

Description

BASADR®-E 104

Primer| Solvent-Free| Polyamine| Damp-Substrate

BASADUR®-E 104 is an epoxy, solvent-free primer; and is specially designed for damp-substrate. This product is two-component, and because of its formulation, it can be used on fresh concrete surfaces or places where there is a possibility of moisture present in the substrate.

The high adhesion strength of this primer leads to its maximum resistance to surface blisters and delamination of the floor due to the presence of moisture in the substrate. However, blisters may occur if the moisture of the substructure is very high.

Also, due to the absence of solvent in the formulation of this epoxy primer, the problems caused by air trapping in the substrate will be eliminated. This primer also helps to reinforce the substrate by penetrating it.

It should be noted that because of the special formulation of this epoxy primer, its pot life is short, and therefore the contractor must apply the primer fast. To prevent rapid curing of BASADR®-E 104, prepare the material in small quantities. Avoid storing the prepared material in high volume in the bucket.

BASADUR®-E 104 epoxy primer is two-component and after mixing the two components with a drill mixer, this product is ready to be applied on all types of concrete, stone, mosaic, ceramic, and metal surfaces. Epoxy primer BASADUR®-E 104 is applied using wool rollers.

 

Reviews

There are no reviews yet.

Be the first to review “Damp-Substrate Epoxy Primer”

Your email address will not be published. Required fields are marked *

five × 5 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com