Antistatic Epoxy Primer

Antistatic Epoxy Primer

Product Introduction

Applications

BASADUR®-E 103 applied/used as an epoxy antistatic primer and the first layer of an epoxy antistatic flooring system.

Advantages

  • Anti-static and conductive properties
  • Good adhesion to concrete and epoxy-based flooring
  • Easy application

Storage Conditions

The product must be stored in its original, unopened, and undamaged sealed packaging in dry conditions at temperatures between +15 °C and +30 °C. In these conditions, the product can be stored for 6 months from the date of production.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

For applying BASADUR®-E 103 antistatic primer, after preparing the basic surface, apply general primer and mastic and then apply the self-leveling coating to reach the even, uniform, and integrated surface.

Technical Information

Applications

BASADUR®-E 103 is applied/used as an epoxy antistatic primer and the first layer of an epoxy antistatic flooring system.

Advantages

  • Anti-static and conductive properties
  • Good adhesion to concrete and epoxy-based flooring
  • Easy application

Installation

Before mixing the two parts, stir part A. After adding part B to part A, stir the mixture for 2 minutes at 400 rpm using a drill mixer. While stirring avoid sudden movements that allow air to enter the mixture. Then apply the material on the surface using a wool roller. Consumption of prepared material per square meter is about 100 to 200 grams (depending on floor conditions).

Do not keep the mixed material in the bucket for a long time; because the primer will have a very short pot life due to the heat generated by the reaction of the components.

Description

BASADUR®-E 103

Primer| Solvent-based| Antistatic| Polyamine

BASADUR®-E103 is an Antistatic Epoxy-based primer with a mixture of amide and polyamine as the hardener. This antistatic primer formulation contains solvents and additives that lower the product surface electrical resistivity to the conductive range, so it could provide a suitable substrate for self-leveling antistatic topcoats. This epoxy primer makes a conductive surface and transmits the static electric charge, that is buildup due to people’s movements, traffic, wear, rubbing, etc., to the earth to the ground.

BASADUR®-E 103 antistatic primer is used as the first step in applying antistatic resin flooring after proper surface preparation. Before applying the antistatic primer, a conductive network (I.e., copper network) has to be applied on the floor. This network will be the passage for conducting the static electric charge to the ground well of the building. BASADUR®-E 103 is black due to its special formulation and to ensure its proper performance, it must be uniformly applied over the substrate and the conductive network. This antistatic primer, like other types of resin flooring materials, is two-component, and due to the relatively high viscosity of component A, ensuring the proper mixing of the two components is crucial in getting the best result.

The surface electrical resistivity of the cured BASADUR® E103 anti-static epoxy primer is in the range of -Ω. It has a long pot life and very easy application.

Download TDS

Reviews

There are no reviews yet.

Be the first to review “Antistatic Epoxy Primer”

Your email address will not be published. Required fields are marked *

two + 4 =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com