Solvent-free Epoxy Primer

Solvent-free Epoxy Primer

Product Introduction

Epoxy Primer| Solvent-Free| Polyamine| General

BASADUR®-E 102 is used as a primer layer for installing epoxy flooring systems in heavy traffic applications or poor substrate strength as a floor sealing layer.

 

Characteristics / Advantages

  • Very high adhesion to concrete, mosaic, stone, and ceramic
  • Easy to use during installation
  • Very high strength and the ability to strengthen weak substrates

 

BASADUR®-E 102 with a formulation that leads to rapid drying of the primer and makes maximum adhesion to the concrete surface. This product can also be used on mosaic, ceramic, and stone surfaces.

Storage Conditions

The product must be stored in original, unopened, and undamaged sealed packaging in dry conditions at temperatures between +15 °C and +30 °C. In these conditions, the product can be stored for 6 months from the date of production.

Preparation Substrate

First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete.

Any weak points in concrete and surface imperfections such as holes, cavities, and cracks should be drained and repaired. For this purpose, you can use the BASA repair material.

It should be noted that all dust on the surface must be removed before applying the products. Using industrial vacuum cleaners with high suction power is recommended.

Technical Information

Appearance

Part A: transparent, liquid

Part B: Brownish transparent, liquid

Suitable substrates for BASADUR®-E 102:

Concrete, mosaic, stone, and ceramic surfaces

Packaging:

Small Package

Part A: 11.3 Kg container

Part B: 7.7 Kg container

Part A+B: 19 Kg ready to mix unit

Large Package:

Part A: 200 Kg drum

Part B: 120 Kg, 40 Kg drum

Installation

Before mixing the two parts, stir part A. After adding part B to part A, stir the mixture for 2 minutes at 400 rpm using a drill mixer. While stirring avoid sudden movements that allow air to enter the mixture. Then apply the material on the surface using a wool roller. Consumption of prepared material per square meter is about 100 to 200 grams (depending on floor conditions). Do not keep the mixed material in the bucket for a long time; because the primer will have a very short pot life due to the heat generated by the reaction of the components.

Description

BASADUR®-E 102

Epoxy Primer| Solvent-Free| Polyamine| General

 

BASADUR®-E 102 is a solvent-free epoxy primer based on a modified epoxy resin with a mixture of amide and amine curing agents. This epoxy primer is a solvent-free product and therefore does not cause solvent trapping and problems associated when used on porous concrete substrates. Solvent-free primer BASADUR®-E 102 is used as the first layer in the epoxy flooring system where the flooring is required to have high adhesive strength and high mechanical properties. This epoxy primer is two-component, and after applying it on the concrete surface and spreading the quartz sand sporadically its adhesion strength to the next layers of epoxy flooring can be doubled.

 

BASADUR®-E 102 with a formulation that leads to rapid drying of the primer and makes maximum adhesion to the concrete surface. This product can also be used on mosaic, ceramic, and stone surfaces.

TDS

Reviews

There are no reviews yet.

Be the first to review “Solvent-free Epoxy Primer”

Your email address will not be published. Required fields are marked *

one × five =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com