First, the concrete substrate must be prepared mechanically and using grinding machines until the surface of the concrete, which contains cement and water residues and causes the surface to become alkaline (concrete syrup), is removed to reach the open pores of the concrete. Weak points in concrete should be removed and surface imperfections such as holes, cavities, and cracks should be emptied and repaired with a suitable resin material.

It should be noted that all dust on the surface must be removed before applying the products, for which the use of industrial vacuum cleaners with high suction power is recommended.

The substrate must first be impregnated with one of BASA POLYMER Primers. The substructure should be prepared with an epoxy self-leveling coating to create a suitable substrate for installing the antistatic coating. After making a suitable substrate (completely level and integrated), First, the copper network is glued to the surface using epoxy putty and then an antistatic epoxy primer is applied on the surface. The substructure is now ready to install the antistatic self-leveling coating.