Industrial Epoxy coating Solvent free 20%

Industrial Epoxy coating Solvent free 20%

Product Introduction

Two-component, self-leveling epoxy coating suitable for industrial and commercial flooring, parking lot flooring, production hall flooring, warehouse flooring, etc.

Storage Conditions

If the door is not opened and the original packaging of the factory is not damaged, the product can be stored for 6 months from the date of production in a dry environment and at a temperature between 15 and 30 degrees Celsius.

Preparation Substrate

The substrate must be completely prepared and free of any dust, gravel, oil, and pollution. Flooring has been done using equipment suitable for the type of substructure (concrete, stone, mosaic, or ceramic) and the appropriate primer has been applied to the surface.

Technical Information

  • Very high mechanical strength
  • High gloss
  • Economical
  • Excellent self-alignment capability
  • Very easy exit of air bubbles
  • Excellent filler
  • Excellent adhesion to all types of surfaces
  • The final surface without disturbance

Appearance specifications:

Component 1: liquid, colored

Component 2: liquid, clear

  • Mixing ratio by weight: 20% by weight
  • Suitable subcategories for the product:

Concrete, mosaic, stone, ceramic, and resin flooring surfaces

packing:

Component 1: 20.8 kg bucket

Component 2: 4.2 kg bucket

Installation

Before mixing the two components, first, stir component 1. After adding the entire component 2 to component 1, stir the resulting mixture for about two minutes at a speed of 400 rpm using a drill mixer until it is homogeneous. Avoid movements that cause air to enter the mixture while stirring.

According to the required type of use (intermediate coating, mastic, cornice, putty, grout), the amount of material consumption and work method will be different.

Description

BASADUR® E 313

Self-leveling epoxy coating Solvent-free Polyamine 20%

BASADUR® E 313 color self-leveling epoxy coating is a solvent-free two-component product based on modified epoxy resin and polyamine hardener. The low viscosity and high self-leveling ability of this epoxy coating have created a smooth and polished final surface, without perforation and impenetrable. This product is widely used in cases where anti-slip epoxy flooring with an orange peel finish is needed. It is more economical than BASADUR® E 303 self-leveling epoxy coating.

BASADUR® E313 product has been designed and optimized based on maintaining wear resistance, hardness, and mechanical stresses in medium to heavy traffic. It has been widely accepted in various uses, including warehouse flooring, parking lot flooring, and hall flooring.

One of the important features that are considered important for many floorings is the wear resistance and long life of the flooring. Especially when the traffic is on the surface of the epoxy floor. BASADUR® E313 has a hard final surface that can be very suitable for epoxy industrial and commercial floors. Easy cleaning and a variety of colors are other features that can keep your environment beautiful and attractive for a long time.

TDS

Reviews

There are no reviews yet.

Be the first to review “Industrial Epoxy coating Solvent free 20%”

Your email address will not be published. Required fields are marked *

three × three =

"Basa Polymer, specialist in the production and consulting of resin flooring"

To receive free expert advice, price inquiry and place an order, please contact us:

phone

+982144960014

Whats app

+989353426892

Email

info[at]Basapolymer[dot]com